Aquametrix SHARK TX / TXP Transmitters User Manual Uživatelský manuál stáhnout pdf (Strana 4)

MΩ/cm

0 to 19.99 0.01

uS/cm

0 to 2.000 0.01

0 to 20.00 0.1

0 to 200.0 0.1

0 to 5000 1.0

mS/cm

0 to 20.00 10

0 to 200.0 50

Section I - Specifications Page 2

MULTI-PARAMETER TRANSMITTER USER’S MANUAL

Section I - Specifications

pH ORP Conductivity Flow

Display 2 x 16 alpha-numeric LCD display

Power Requirements 4 to 20mA, Loop Powered, 16 to 32 VDC

Flow: 0 to 9999 with

selectable

flow rate units

pH: 0.01 to 14.00 ORP: -1999 to +1999mV

Volume: 0 - 999 with Auto Range

Measuring Range

(Dependent on sensor)

Flow rate units: Gallons (GP), Cubic

Temp: 0 to 100°C or Temp: 0 to 100°C or

Feet (CF), Liters (LP), Cubic Meters

32° to +212°F 32° to +212°F (

CM), custom by entering factor

related to Gallons

Time units: Seconds (S), Minutes (M)

Temp: 0 to 100°C or 32° to +212°F

Hours (H)

Automatic or Manual

Temperature Automatic or Manual

Not r

equired

User selectable temperature

Not required

Compensation 0 - 100°C (32° to +212°F)

compensation slope 0.0 to 10.0%/°C.

0 to 100°C (32° to +212°F)

Temperature Unit °C or °F Not required

Temperature Sensor User selectable: 300Ω NTC Thermistor, 3000Ω NTC Thermistor or Pt. 1000 RTD Not required

Auto-Calibration

Manual Calibration

Dry Calibration

Calibration Modes Manual Calibration

emperature Calibration

Sample Calibration K factor Input

Temperature Calibration Temperature Calibration

Ambient Conditions Temperature: -20°C to +60°C or -4°F to +140°F Humidity: 0 to 90% RH (non-condensing)

Sensor to Transmitter Differential Sensor: 3000 ft

300 ft

2000 ft

Distance Combination Sensor: 10 ft

Analog Output

4 to 20mA

Isolated Output, Range expand 0 to 100% of full scale (min segment 10% of full scale), max. load 800Ω

Memory Back-up All user settings are retained indefinitely in memory (EEPROM)

SHARK

TX Enclosure: NEMA 4X, 1/4 DIN, polycarbonate enclosure with two 1/2” conduit holes

Mechanical

SHARK

TXP Enclosure: NEMA 4X front panel, 1/4 DIN, polycarbonate

SHARK

TX Mounting: Universal Mounting kit for surface, pipe and panel mount included

SHARKTXP Mounting: Panel and DIN rail mount included

Sensor Input

Probe: -600 to +600mV Probe: -1999 to +1999mV Cell: 0 to 9999Ω

addle: 0 to 2000Hz

Temp. Sensor: 0 to 9999Ω Temp. Sensor: 0 to 9999Ω Temp. Sensor: 0 to 9999Ω

Invalid Entries Invalid entries cannot be stored

Manual Test Mode Process value can be simulated with arrow keys to verify correct setup of output

Output Hold 4 to 20mA output is placed on hold when the transmitter is in Menu mode

Recall data from last

Recall data from last calibration, calibration mode,

calibration, calibration buffer

Calibration Data

1st & 2nd accepted buffer value and probe mV output,

accepted v

alue, and cell Recall store K factor.

calibration temperature, calibration slope, and probe

resistance, calibration

efficiency

temperature

Auto Return User selectable auto return if the transmitter is left in menu mode for more than 10 min.

Display Damping User can select rate at which the transmitter updates display. Enables display damping of unstable process

Net Weight SHARK

TX: 0.71 lbs (0.32 kg)

SHARKTXP: 0.25 lbs (0.12 kg)

Approvals ULC (pending)

1 2 3 4 5 6 7 8 9 ... 81 82

Komentáře k této Příručce

Žádné komentáře

Aquametrix SHARK TX / TXP Transmitters User Manual Uživatelský manuál Strana 4

Komentáře k této Příručce

Související produkty a manuály pro Příslušenství pro vodu Aquametrix SHARK TX / TXP Transmitters User Manual